Filtramatic CP

Designed for Shipboard and Domestic Conditioning

Pumping Disintegrator

Impellor rotating within a stationary cutter ring. Ideal for handling raw sewage in shipboard or domestic applications

Filtramatic CP is an ingenious, low cost combination of pump and macerator. Designed for small scale land or marine sewage handling installations, it is compact and quiet running. Where mains sewerage is distant and costly to reach Filtramatic CP installations make possible economic connection to mains facility an important consideration for residences or groups of houses etc.

Filtramatic CP macerates (grinds) raw sewage to a small particle size and lifts the effluent through heads of up to 35 metres. Small particle size means less costly small bore pipework can be used, reducing installation costs significantly. Use of Filtramatic CP is beneficial to package treatment plants by reducing wear on pumps and improving efficiency.

Construction

Filtramatic CP is robustly constructed for minimum maintenance. The macerator element consists of a cast iron canopy and head enclosing a heat treated stainless steel alloy impeller rotating within a stationary cutter ring of hardened nickel steel.

The pumping element is a positive displacement, self-priming progressive cavity pump of acetal copolymer directly driven from the motorshaft. Thus there are no valves, pistons or diaphragms to get choked or wear out. The motor element is continuously rated and totally enclosed and can be wound to suit most voltages and frequencies.

Installation

For simplicity of access and maintenance, Filtramatic CP is mounted horizontally outside the collecting sump or holding tank.

Range and Performance

Filtramatic CP is available in 3 sizes covering heads of up to 35m. (115ft) or throughputs of up to 7600 litres per hour (1680 gph). For detailed performance figures see table below.

Specification

125 CP800. 1/3 Phase

Inlet Port

3" BSP

Outlet Port

1.5" BSP

Pump Speed

1450

Hz

KW

0.75

Max Suction Lift

125 CP1600. 1/3 Phase